SEA SCOOTER

Model

SKD-SS001

(24V200W)

SKD-SS002

(24V200W)
Specifications and Technical Data
Dimensions 597 x 372 x 311 mm with battery 8.4 kg
Buoyancy For snorkeling it is usual to have about 2 lbs buoyancy. For diving it is usual to have 5 oz buoyancy. In both cases the seascooter will rise to the surface of the water if accidentally released at depth. Always wear a coast guard approved personal flotation device when using seascooter.
Performance Speed

SKD-SS001

TWO SPEED4.8 / 6km/h

SKD-SS002

ONLY ONE SPEED6km/h
Operating time SKD-SS001 SKD-SS002up to 1hour (extended battery)
Depth rating 30 meters
Thrust 5 kg
Power to weight ratio 1 : 1
Motor SKD-SS001 SKD-SS002 24volt DC - 200watts continuous
Battery SKD-SS001 SKD-SS002 with two 12 volt DC 5 amp hours
Life: approximately up to 500 charging cycles
Charging Charging adaptor included
package:  640 x400 x370 mm CARRY BAG included
Container quantity:  315pcs/20, 630pcs/40ft ,712pcs/40HQ
Waterproof protection:  YES YES
Mos tube overheat protection: YES NO
Electric motor overheat protection: YES NO
Low voltage protection: YES NO

Waterproof protection: in case of water coming into the sea scooter, it warns and protect the control system that the controller and motor wouldn't been burned out because of short circuit.

Mos tube overheat protection: guarantee the system to be steady and lengthen the using life

Electric motor overheat protection: prevent the motor from heating quickly in case the motor stopping so that guarantee the using life.

Low voltage protection: when the battery voltage is not enough, it warns. Then you can charge the battery in time.